|Place of Origin:||China|
|Model Number:||1070 A1070 19700 A7 A9100|
|Minimum Order Quantity:||500kg|
|Packaging Details:||wooden carton pack|
|Delivery Time:||15-30 days|
|Supply Ability:||10000 ton per monh|
|ID:||505mm,610mm||Application:||Cans End,fuel Tank ( Pipeline ) Of Airplane,shell Of Mechanical ( Electrical ) And Curtain Wall|
aluminum sheet metal rolls,
aluminium sheet coil
AMr2/1520 EN AW-5052 AlMg2.5 2L55 A-G2.5C Allloy A5052 HR hot rolling Aluminium coil for cans end fuel tank curtain wall.
Alloy: AlMg2.5 AMr2/1520 EN AW-5052/AlMg2.5 AlMg2.5/3.3523 2L55 5052(A-G2.5C) 5052/A95052 Allloy A5052 Aluminium HR hot rolling coil.
Temper: F or O,H112,
Thickness: 0.01~ 14mm,
Inner diameter: 610mm,505mm,
Max Outer diameter: 2560mm,
Max weight per coil: 28 ton,
5052 aluminum plate for AL - Mg alloy aluminum plate, is one of the most widely used antirust aluminium, the alloy of high strength, especially the fatigue strength, plasticity and high corrosion resistance, can not heat treatment to strengthen, in a cold work hardening plasticity is good, when the cold work hardening plasticity is low, good corrosion resistance, good weldability, cutting performance is bad, can be polished.
Stock material for cans end,fuel tank ( pipeline ) of airplane,shell of mechanical ( electrical ) and curtain wall.
5052 aluminum plate use is mainly used in the request high plasticity and good weldability, working in a liquid or gas medium low load parts, such as tank, gas or oil duct, and other various liquid containers made of deep drawing small load parts: wire used for rivet. Also commonly used to transport vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.
5052 alloy aluminium coil Chemical Composition.
Surface quality of the editors:
1, The surface are not allowed to have a crack, corrosion spots and nitrate.
2, Is allowed on the surface depth is less than 8% of the nominal size peeling defect part wall thickness, air bubbles, surface coarse and local mechanical damage, but the defect depth is not more than 0.5 mm, defect sheet with a total area of no more than 5% of the total area.
3, allow the supplier along the longitudinal profiles polishing to the surface is smooth.
4, other requirements: you have the demand side and the supplier.
Q1. What’s the maximum diameter ?
Q2. Is it possible be zinc free copper foil?
Yes ,it is possible.
Q3. Is it the Fumigation carton pallet?
Yes ,it is .
Q4. How long time get the sample
Is 7 days
Q5. How to contact you?
Q6: Can we accept customize?
Yes,we can.We can manufacture as customer's requirement.You can send the CAD or drawing to us.
Contact Person: admin