 |
| Place of Origin: | China |
| Brand Name: | JIMA |
| Certification: | ISO |
| Model Number: | 5083 |
| Minimum Order Quantity: | Negotiation |
|---|---|
| Price: | Negotiation |
| Packaging Details: | Wooden carton pack |
| Delivery Time: | 15-30 days |
| Supply Ability: | 10000 ton per monh |
| Alloy: | 5083 | Standard: | GB |
|---|---|---|---|
| Application: | Applied To The Cylinder,head,bulkhead、wash Board Of The Tankers | Temper: | O,H111,H32 |
| Name: | 5083 Aluminum Alloy Sheet For Cylinder And Head Of The Tankers | ||
| High Light: | 5083 H111 Aluminum Alloy Sheet,aluminium 5083 h111,5083 aluminium plate for Cylinder Head |
||
We are specialized in automotive aluminum products. We have some old customer in for automobile application , so we always hold available materials in stock for0.8mm, 1mm,1.2mm,1.5mm and 2mm ,Such as 6016,6111,6061,6010,6011,6009,5754 5182 ,6181A and 6005A alloy etc ,Size can be cut into as per request.
Applied to the head of the tanker
Applied to the bulkhead board of the tanker
Large size:Max.width reaches 2650mm,length≥10000mm.
High uniformity:Annealed by continuous heat treatment line,and the properties differences of the same coil and between coils are slight.
Precise dimension and excellent flatness:Dimension and flatness meet EN/ASTM standard.
| Side of use | Control points | ||
| I | II | III | |
| Cylinder,Head | Surface Quality/Mechanical Property/Thickness Tolerance | - | Flatness |
| Bulkhead,Wash Board | Mechanical Property/Thickness Tolerance | Surface Quality | Flatness |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Standard |
| 5083 | 0.40 | 0.40 | 0.10 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | EN573 |
| Product Type | Thickness(mm) | Width(mm) | Length(mm) | |
| Plate | Wide Plate | 4~8 | 2200~2600 | 2000~12000 |
| Standard Plate | 1500~2200 | 2000~12000 | ||
| Coil | Wide Plate | 2200~2600 | - | |
| Standard Plate | 1500·2200 | - | ||
Note:Typical width for tanker body and resistance plate:1500/1600/1800/2000/2200/2400mm
Typical length 5500mm/5750mm/6000mm/7500mm/7850mm/8600mm/11800mm
| Typical Alloy | Typcial Temper |
Rp0.2(Mpa)
Yield Strength
|
Rm(Mpa)
Tensile Strength
|
A50(%) Elongation |
Minimum Bending Radius of 180 Degree |
Standard |
| 5083 | O/H111 | ≥145 | 290~370 | ≥17 | 1.5t | EN14286 |
| H32 | ≥215 | 305~385 | ≥12 | - | ASTM B209 |
| Type | Standard Plate | High Class Plate | Bright Plate | Mirror Plate |
| Surface | ★★★☆☆ | ★★★★☆ | ★★★★☆ | ★★★★★ |
| Roughness | 0.5~0.8 | 0.3~0.5 | 0.1~0.3 | ≤0.04 |
| Product Description |
Smooth Surface Defect Deepness＜Minus Tolerances of Thickness |
Find and smooth surface No or only very little colour aberration and chatters |
Bright,fine and smooth surface No colour aberration and chatters |
Mirror reflective surface Reflectance≥86% |
|
Applicable Standards |
GB/T 3880 |
EN 14286/ASTM B209 En485 Customer special requirments |
EN 14286/ASTM B209 Customer special requirments |
EN 14286/ASTM B209 Customer special requirments |
| Application |
Use directly or after brashing Cylinder,Head,Bulkhead,Wash Board |
Directly use Cylinder,Head,Bulkhead,Wash Board |
Directly use Cylinder,Head |
Directly use Cylinder,Head |
Contact Person: Annie
Tel: Whatsapp:+8615000729029
