Aluminum foil 5182 H48 for aluminum raw materials of beer can end
Alloy: EN AW-5182/AlMg4.5Mn0.4 AlMg5Mn/3.3549 5182(A-G4.5M)A95182 Allloy A5182.
Temper: F or O,H112, H48
Thickness: 0.01~ 14mm,
Inner diameter: 610mm,505mm,
Max Outer diameter: 2560mm,
Max weight per coil: 28 ton,
Application: cans end ring-pull, Beer ends , drink lids ,beverages lids ,beer lids
Al - 5186 - Mg alloy, is one of the most widely used antirust aluminium, the alloy of high strength, especially the fatigue strength, plasticity and high corrosion resistance, can not heat treatment strengthening, and in a cold work hardening plasticity is good, when the cold work hardening plasticity is low, good corrosion resistance, good weldability, cutting performance is bad, can be polished. Purpose is mainly used for high plasticity and good weldability, working in a liquid or gas medium low load parts, such as E-mail, gas or oil duct, and other various liquid containers made of deep drawing small load parts: wire used for rivet.
Aluminum plate for Al - 5182 Mg of antirust aluminum, 5182 performance similar to 5 how a02 aluminum plate, but because of a little higher than 5 how a02 magnesium content, and added a small amount of silicon, so the weldability is better than 5 how a02, 5182 aluminum plate with gas welding and argon arc welding, spot welding and welding seam welding performance is very good, other performance has no big difference.
5182 belong to Al - Mg alloy, using a wide range, especially construction cannot leave the alloy, is the most promising alloy. Good corrosion resistance, good weldability, cold workability is good, and with moderate intensity. 5052 main alloy elements for magnesium, has good forming performance, corrosion resistance, weldability and medium strength, used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.
Q1. How long time get the sample
Is 7 days
Q2: How many quantity for 40'GP load?
Q3: How many staff do you have -
A:We have 380 workers
Q4: How can get quotation ?-
A: In order to offer right quotation, we need know the alloy ,temper,thickness,width,length,application and quantity etc.
Q5. How many tons you can supply each month?-
We can offer more than 40000 tons each month
Q6. Would you accept delivery spread over a period of time?
A: Yes,we can.
Q7. How long do you generally keep your offers open ?
A: In case of firm offers we usually keep our offers open for five days
The central laboratory is equipped with the device which made by the world's top manufacturer.They can carry out the test such as :the product composition analysis, mechanical performance analysis, metallographic analysis, environmental simulation, heat test, testing analysis, corrosion analysis, project.
Our company had built the quality supervision department and Aluminum lab to control the quality of production which will export the other countries.